Depending on the machine lubrication requirements, as required for each oil cup lubrication and artificial lubrication point refueling.
Bending purchased by the parameters specified coil.
When powered on, the next roll on roll both directions and down movement, check the movement are all normal stuck.
In strict accordance with procedures and methods of operation coil processing operation, roll down to the limit in the last position, we must pay great attention to the safe operation of equipment.
When the main drive down only after the lifting upper roll, flip bearing dumping reset and roll tilt.
During operation, if found to have an irregular noise, shock and other irregularities, should immediately stop checking.
Operation, co-ordination of staff to and obey the command of the person in charge coil, there is no password, ban start the machine.
For coil operation should pay great attention to hand was pressed steel plates together and roll into.
Driving with lifting plate or roll, be careful not to collide and machines.
After the coil, so that work completed, materials clean and good equipment maintenance work, turn off the power.